top of page

BMW S63 Carbon Intake System
F90 M5

Pre Preg Carbon Fiber High Flow Intake System with Turbo Inlets
$2499

Design
 

For this application we have opted for both banks having large cross sectional turbo inlet tubes with smooth non concentric expanding inlet tubes which with silicone couplers. 

The turbo inlets are vastly larger in size over the OEM and feature an internal velocity stack which further smoothens and accelerates the air into the turbo housing.
The expanding large volume inlet tubes act like a
large velocity stack which accelerates the airflow and is much larger than the small and short velocity stack fitted to the internals of the oem intake.  The result is a far smoother lower rpm torque availability from the engine vastly improving drivability.  Throttle response is immediately felt to be smoother and more eager.
The inlet tubes are attached via a stainless steel v-band clamps to the air filter housings which attaches directly to the oem front air feeds.

F90-M5-CFD.JPG

Air Intake Temperatures | Heat Soak

The result is a system which matches the factory intake system for inlet temperatures.  In addition the system changes the air flow characteristics for a smoother delivery and allows more air to enter the turbos more easily.  This fully developed and intelligently designed intake system is not just something that looks good in the engine bay but does an impeccible job as an air smoothing device, increasing air available, increasing air speed into the turbo's, allowing the turbo's to spool faster, filters for longer more efficiently, keeps intake air temperatures low and making a sophisticated race car like intake noise under load.  Most important of all, it is the way the engine becomes more alive, responsive and enjoyable to use not just under full load but also normal every day driving.

Air Filtration
 

Within the beautifully shaped carbon shaped enclosures sits our bespoke short stack high surface area filter larger than any cone filter design currently on offer on the market with a huge opening of 170mm (6 3/4") and is designed to take full advantage of the intake tubes by altering the direction of the airflow towards the outer walls.  By placing the air filters in front of the inlet tube we achieve the largest velocity stack ever seen for the F90 and which also has the best laminar flow.  It is important to note that we have painstakingly opted for the largest possible air filter for a various number of reasons.  Not only does a larger air filter allow for more air flow and therefore power but it also does not block up for longer and continues to be efficient at it's main purpose which is to filter the air of harmful elements.The air filters are completely encapsulated within the air filter housing rejecting the all of the engine bay hot air and with the angle of the front inlet the air circulates around the air filter giving an even distribution of outside cool air.

Road Testing / Datalogging
 

Road tests and datalogging has shown improved acceleration with vast improvements to throttle response and more torque especially felt in gears 3 onwards.

Specifications​

  • Pre-preg 6-piece autoclave carbon fiber construction

  • Sealed design for optimal air temperature efficiency 

  • Available in Gloss or Matt clear coated finish

  • Improved power, throttle response and induction noise

  • Plug & Play fitment

Components

  • 2 x Venturi Inlet Tube

  • 2 x Turbo Inlet Tube

  • 2x Air Filter Housing / Inlet Duct

  • 2x Bespoke Infinity Design Air Filter

  • 2x black metal clamps 

Availability

   Worlwide​

bottom of page